lillen

Awning

Insert the Crank Arm

  1. Insert the cranck arm fully
  2. Rotate the crank arm 90 degrees crank-arm-insert
  3. Pull the crank arm outwards into locked position crank-arm-lock

Wind out the Awning

Wind out the awning so that there is no tension on the fabric awning-slack Apply the locks awning-lock Apply some tension to the fabric awning-tension

Position the Legs

Release the legs by pushing on the spring release leg-release Lock the legs into place leg-lock Optional leg wall connector leg-wall-connector

Manual

The manufacturers operating manual is available as a PDF download.